1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 70528E6918721E053C6DEED2B6E55039
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...
Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F8
Saved to : D:\MobilePlus\Infinity Box Dongle\Portable\MTK\Read_out\FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin
Done!
Elapsed: 00:00:25
Reconnect Power/Cable!
--------------------------------------------------------
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 70528E6918721E053C6DEED2B6E55039
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Backup done
Read ExtData
Sorting ExtData
Sort Ok, Rebuild Ok
Restore ExtData
All done
UserCode request removed
UserCode set to default ( 0000 or 1122 )
Done!
Elapsed: 00:00:19
Reconnect Power/Cable!
How to Read Flash File and Reset Password:
FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin
Note:
If
Links not working or any others problems. So you can tell us in the
comments Box. We will try to resolve your issue as soon as possible.
Don't forget to share the post.
Thank you to Support Us.
